Kregen 942 Master Sand Filter

942-FRB Sand Filter

5 Layer Sand Media Filter

Stage 1. Zeolite Plus (0.45mm) (Australia) : Has an unusual crystalline structure and greater absorbing power, it also removes suspended solids, soluble heavy metals and soluble ammonium.
Stage 2. Anthracite (AN) (USA) : Anthracite absorption and high precision, can remove particles, colloidal impurities, suspended solids, or removing iron and manganese. While trapping the sediments, being the primary function of the carbon, it leaves some chlorine in the water.
Stage 3. Silica Sand (0.45mm) : Further trapping of very fine sediment at the surface of fine silica sand.
Stage 4. Silica Sand (1.2mm) : Removes dirt and prevent diseases such as Typhoid, Cholera, Bihdryia and Amoeba.
Stage 5. Silica Sand (2.4mm) : Most ideal use in domestic and industrial water filtration due to high density and the high level of hardness and toughness. It is efficient for removing particles, sediments, mud and suspended solids in the water.

Features

• Filtration water up to 10 Micron
• Top USA Filtration Technology
• Easy and Fast installation
• Low maintenance
• No cartridge replacement
• 80% water saving on back-washing
• Large capacity with effective filtration
• Smooth water flow

Step 1. Backwash:
Turn the MPV to “Backwash” mode and let the sediment flushed out until the water appears clean. It takes about 5-10 minutes.

Step 2. Rinse:
Turn the MPV to “Rinse” mode to ensure the filter water is clean. Time of rinse is about 5-10 minutes.

Step 3. Filter:
Turn the MPV to “Filter” mode and the filter backwash system is complete and the filter is as good as new.