Kregen 1042 FSS SAND FILTER

040-FSS MATTE SAND FILTER

5 Layer Sand Media Filter

Stage 1. Zeolite Plus (0.45mm) Australia: Has an unusual crystalline structure & greater absorbing power, it also removes suspended solids, soluble heavy metals & soluble ammonium.

Stage 2. Anthracite (AN) (USA): Anthracite absorption and high precision, can remove particles, colloidal impurities, suspended solids, or removing iron & manganese. While trapping the sediments, being the primary function of the carbon, it leaves some chlorine in the water.

Stage 3. Silica Sand (0.45mm): Further trapping of very fine sediment at the surface of the silicon sand.

Stage 4. Silica Sand (1.2mm): Removes dirt and prevent diseases such as Typhoid, Cholera, Bihdryia & Amoeba.

Stage 5. Silica Sand (2.4mm): Most ideal use in domestic & industrial water filtration due to high density and the high level of hardness and toughness. It is efficient for removing particles, sediments, mud and suspended solids in the water.

Features

• Filter water up to 10 Micron
• Top USA Filtration Technology
• Easy and Fast Installation
• Low Maintenance
• No Cartridge Replacement
• 80% Water Saving on Back-Washing
• Large Capacity with Effective Filtration
• Smooth Water Flow

Step 1. Backwash:
Turn the MPV to “Backwash” mode and let the sediment flushed out until the water appears clean. It takes about 5-10 minutes.

Step 2. Rinse:
Turn the MPV to “Rinse” mode to ensure the filter water is clean. Time of rinse is about 5-10 minutes.

Step 3. Filter:
Turn the MPV to “Filter” mode and the filter backwash system is complete and the filter is as good as new.